Search results

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. anthonemorris

    Nissan CA18 troubleshooting

    Re: Nissan CA18 woes Also an electrician just ran through the car on Friday. Everything was checked
  2. anthonemorris

    Nissan CA18 troubleshooting

    Re: Nissan CA18 woes New pump, filters. Changed fuses and relays when I got the car.
  3. anthonemorris

    Nissan CA18 troubleshooting

    So no luck with our diagnosis. Coils are in good condition. Fuel pressure good. Spark very good. Engine tumbles. Timing good. But somehow there is no fuel ending up in the combustion chamber. Any reason why besides the injector timing?
  4. anthonemorris

    What Oils are you Using?

    yellow bottle shell helix
  5. anthonemorris

    What Oils are you Using?

    At the moment I'm using helix 20w50 in the block and np gear oil in the box. Reason for the np is that there's a leak and I don't wanna waste my money topping up belray. But it works very well I must say and I have no noise or hard shifting while using it. May keep using it anyway. In the...
  6. anthonemorris

    2008 Mazda3 Dragging and scraping noise from the front of the vehicle.

    Sounds like the bearing on the crankshaft. Honestly that's no pulley. That's the crank you pointed out.
  7. anthonemorris

    Nissan CA18 troubleshooting

    Mechanic and I have the same thoughts. Between today and Wednesday I should know if the coils are good or not as we both suspected the coils although they making spark it may not be strong enough to carry the engine anymore. Is so a couple good aftermarket coils are in order. His electrician...
  8. anthonemorris

    10 Weird Laws in Trinidad and Tobago

    OK I knew of 1 & 5, but 3? That takes the cake as I wash my car and repair it at the side of the road every time I do either. Good thing police don't enforce it. Many times they see me doing it and ask if I need help lol. But they are weird laws.
  9. anthonemorris

    Nissan CA18 troubleshooting

    So I'm hoping in checking the 2 coils that this car carries that somehow I get it to start and run as intended. If aftermarket coils do the trick then I should see slight hp improvement as well.
  10. anthonemorris

    Nissan CA18 troubleshooting

    Re: Nissan CA18 woes for the life of me i cant figure out what could be the issue behind it all.
  11. anthonemorris

    Nissan CA18 troubleshooting

    So now I'm getting frustrated. So the timing on the car is spot on. Belt is worn yes but isn't the cause of my issues now and will be changed out before the car leaves. What I'm being told is that there's a short in my ignition system which is causing my car not to start. So I guess the next...
  12. anthonemorris

    What Does A Vehicle Mean To You?

    To me it's a great achievement to own your own vehicle first off. Yes we know that some people are given cars to drive but it isn't yours on paper. The day it becomes yours (certified copy and insurance in your name) then the achievement is yours. Mobility comes after. Hobby comes way down the road
  13. anthonemorris

    #Modsrides

    Yeah well I'm hoping to get to fully realize the plan for this car that I have. Cosmetic would be the last thing buy all the mechanical necessities and supporting areas will be done first. Wanna do a wine red or color match of the dash for an external colour. Would have led floor light strips...
  14. anthonemorris

    Can Someone Recommend a Good Dressing?

    I use that mix on my rims so that I don't wreck the paint but still get the grime off. Actually all my engine bays so far I haven't had the issue of space constriction.
  15. anthonemorris

    #Modsrides

    OK so things took a different turn for me in terms of mods and maintenance. My car has a timing issue so there were a few changes made. Have a nasaki 90 psi pump installed in the trunk now. New in tank and external furl filters. New distributor cap. New set of plug leads. Had all my engine...
  16. anthonemorris

    Nissan CA18 troubleshooting

    Well honestly I can't say that. This past week I started hearing some noise around both front spindles so I'm guessing bearings, calipers, rotors. Want to change the brake lines as well even though they aren't leaking. Need to check the rear drums as well, as today I started hearing a noise like...
  17. anthonemorris

    Can Someone Recommend a Good Dressing?

    If you have a spray bottle then the brush isn't really necessary. If you're cleaning the engine bay a soft to medium bristle paint brush works well enough. As for what to use in the spray bottle, I use a mix of purple blast and simple green car wash concentrate. If you want a better clean add...
  18. anthonemorris

    Can Someone Recommend a Good Dressing?

    as far as the engine wd-40 works wonders. under the fenders use some kerosene/diesel in a spray bottle or you can pick up a bottle of tire shine concentrate from interchem i think (the same guys who make simple green) and use that instead. the car wash i go to uses it and it lasts days without...
  19. anthonemorris

    2008 Mazda3 Dragging and scraping noise from the front of the vehicle.

    Not really. Need a mechanic to take off the cover and see if the belt jumped or skipped a cog on the gear.
  20. anthonemorris

    2008 Mazda3 Dragging and scraping noise from the front of the vehicle.

    Just a thought admin, check to see if the timing is off even by a degree. Could get you back the power you desire.

Online statistics

Members online
0
Guests online
4
Total visitors
4
Totals may include hidden visitors.

Trending content

Newest members

Stay Connected

Back
Top